Xi'an Longyuan Thermal Tech. Co., Ltd.

Addr:No. 80, Shangzhu Group,East railway station, Lintong district, Xi'an

TEL:+86-029-83888032 13630256915

Email:[email protected]

Copyright © www.lydq.com.cn All Rights Reserved

陕ICP备07500985号​   Powered by www.300.cn

>
>
>
The attention of the insulating powder in the mother, copper, aluminum and coil

NEWS

The attention of the insulating powder in the mother, copper, aluminum and coil

[Abstract]:
Insulation epoxy powder is a kind of 100%thermosetting material,which USES melt mixing technology to ensure the consistency and stability of each powder particle
  Insulation epoxy powder is a kind of 100%thermosetting material,which USES melt mixing technology to ensure the consistency and stability of each powder particle.
  The insulation epoxy powder also USES the most important,the most effective wetting activity,the compact solidification and the grinding technology,so that the application performance of the powder is more excellent,can be completely close to the base material.And we adopt the world's most advanced curing reaction mechanism,which can make the curing more uniform,more thorough,and make the coating more compact,with better flexibility and heat resistance.Our strict selection of various materials,to ensure that the excellent electrical insulation coating,corrosion resistance,heat resistance,resistant to high voltage,excellent impact resistance and adhesion,easy construction,curing speed.
  The molecular structure of epoxy resin,curing agent type and reactivity,and various auxiliaries play an important role in the construction and final performance of coatings.Our mother's insulation epoxy resin can guarantee a year's validity when the storage temperature is below 27c.
  One thing you should pay attention to when you choose.
  1.Temperature grade?
  2.Curing procedures?
  3.Whether it conforms to the physical and electrical performance requirements of the proposed USES,and requires no UL certification.
  What are the problems when using other products or methods?
  Which coating method is most suitable?
  6.Is there a suitable tool?Can you cooperate with the products you choose?
  7.Is the plane area sufficient?Is the air normal?Do you have an oven?
  Our insulation epoxy resin can be covered by hot dip coating,thermal spraying and electrostatic coating to the surface of the workpiece to achieve insulation.The workpiece is first cleaned by surface cleaning to remove grease and other adherent dirt,check if there is still burr and clean it,and cover the area with no need of coating.
  Hot dip coating method,the workpiece preheated to 200~260C,the workpiece to the resin powder fluidized bed already in 1~2 seconds,the thickness of 300~400m(the longer or more,the higher the thickness),then remove the cover,depending on the size of workpiece and then decide whether to need after curing temperature.Thermal spraying methods:workpiece preheated to 180~240C,remove the artifact to spray room,spray the resin powder to the workpiece and the thickness of the reach regulation,and then stripped shelter,depending on the size of workpiece and then decide whether to need after curing temperature.Working temperature:the insulation epoxy resin of the mother's insulation should be properly applied,and the performance should be satisfactory between-73 o C and 110 o C.